How to upgrade Samsung Galaxy ACE GT S5830i to Android 4.1.1

How To Update or upgrade Samsung Galaxy Ace S5830i/ S5830 to Android 4.2.1 Jelly Bean based Jellyblast Custom ROM Firmware.

These methods also work on the Samsung Galaxy S5830

 I. Before You Begin:

1.  The following procedure works for Samsung Galaxy Ace GT-S5830 smartphones.


2. Make sure your device have at least 80% battery power.


3. You must have ClockworkMod Recovery installed on your device.


4. Make sure USB Debugging is enabled

II. Downloading Required Files:

Use the link from here and download the Jelly Bean update file.

Save it on your computer.

III. Install Android 4.1.1 Jelly Bean ROM on Samsung Galaxy Ace S5830i:

Connect the Ace with the PC (you need the USB cord for that).

Take the downloaded file from step 1 and copy it to the phone’s SD card.

Unplug the USB cable and turn off the handset.

Enter in recovery mode.

You can manage to do that by holding and pressing the Menu and Power buttons at the same time.

One the recovery mode menu is being displayed, use it and choose the next options: “wipe data factory reset” and “wipe cache partition” (remember to backup the data before applying this step).

Then, select “+++go back+++” and return to the main menu.

From there, select “install zip from SD card” followed by “choose zip from SD card”.

You can now select the downloaded file and flash the same on your Galaxy Ace.; we are almost done.

Wait until the process is over (a couple of minutes) and in the end select “+++go back+++” and “reboot system now”.

How to upgrade Samsung Galaxy ACE GT S5830i to Android 4.1.1

How to Hard Reset the Samsung Galaxy

Samsung Galaxy i9020 Hard Reset

In this guide we’ll explain how you can do a factory reset on your Samsung Galaxy i9020.

1.Turn power off phone

2.hold volume up and press power on, you will see this :

3.use vol-up/vol-down to select enter recovery then press power.

phone will restart & show adroid icon:

4.Now press power & volume up, we’ll see:

5.select: wipe data/factory reset and press power

6.Select “Yes” then press power: Now Start formatting

5.Wait for phone reboote.

Done

Video : Samsung Galaxy S Hard Reset

WARNING : Resetting your phone, means your going to eraser everything your phone have. So you need to copy first contact to your sim card, copy your audios, videos, and pictures.

How to Hard Reset the Samsung Galaxy

How to use voice control command on BlackBerry Z10

The Blackberry Z10 has Voice Control , that allows the user to operate the phone by spoken commands.

The Voice Control commands can make multitasking easier by allowing you to perform a variety of actions and tasks with your voice.

Instead of navigating to a specific app, you can simply open the VoiceControl app and speak your commands.

How to activate voice control on BB Z10 ?

To activate Voice Control:

•  Swipe up from the base of the screen to unlock


• Press and hold the button that sits between the volume rocker on the side of the handset


• Speak your command or request into the handset and when finished, tap the microphone icon at the bottom of the screen

And to open the Voice Control app, do one of the following:

1. On the home screen, tap the Voice Control icon.


2. Press and hold the Mute key on the right side of your device.


3. After the beep, say a command.

Here are some advantages for using Voice Control.

• Make a call.


• Send an email, text message, or BBM message.


• Search the Internet or your BlackBerry device.


• Book meetings and appointments.


• Set reminders.


• Change your Facebook status or post a tweet.


• Save notes and memos in BlackBerry Remember.


• Set an alarm.

Finally, This video can help you to better uses voice command key on the blackberry z10 :

How to use voice control command on BlackBerry Z10

Samsung Galaxy note secrets codes

Samsung Galaxy note 8 secrets codes: List of Hidden Secret Service Codes for Samsung Galaxy Note Mobile Phones